Revision: ab issue Date: May 2011 Manual No.: 0-mag1500511



Descargar 2.78 Mb.
Página62/65
Fecha de conversión21.06.2020
Tamaño2.78 Mb.
1   ...   57   58   59   60   61   62   63   64   65
MAINTENANCE SCHEDULE

  • Maintain more often if used under extremely dusty or severe conditions.

  • EACH USE: Visual inspection of regulator, pressure, and consumable parts.

  • WEEKLY: Visual inspection of torch body, consumables, cables, and leads. Replace or repair as needed.

  • 3 MONTHS: Clean exterior of power supply. Clean and tighten weld terminals.

  • 6 MONTHS: Blow out or vacuum and accumulated dust/dirt from the interior.





  • 5.2 Troubleshooting

  • If you are experiencing trouble with your unit, please refer to the following table for assistance. If you are experiencing issues that are not addressed in the following please contact Smarter Tools Customer Service for help in resolving your issue.









    1. Trouble

    1. Remedy

    1. No weld output; fan does not run.

    1. Place power switch in On position

    2. (see Section 4.3).

    1. Reset circuit breaker at electrical panel

    2. (see Section 3.3).

    1. Check for proper input power connections

    2. (see Section 3.3).

    1. No weld output; fan on.

    1. Unit overheated. Duty Cycle Exceeded. Allow unit to cool

    2. (see Section 1.3).

    1. Loose cable connections. Check cable setup. (see Section 3.6-3.7)

    1. Fan not operating; weld output available.

    1. Check for and remove anything blocking fan movement.

    1. Have Factory Authorized Service Agent check fan motor.

    1. Welding current reduces when welding.

    1. Pour work lead connection. Ensure that the work lead has a secure, unobstructed connection to the work piece.

    1. Circuit breaker or fuse trips/blows during welding.

    1. Under sized breaker (or fuse)

    2. (see Section 3.3)






  • Compartir con tus amigos:
  • 1   ...   57   58   59   60   61   62   63   64   65


    La base de datos está protegida por derechos de autor ©odont.info 2019
    enviar mensaje

        Página principal