Revision: ab issue Date: May 2011 Manual No.: 0-mag1500511

Descargar 2.78 Mb.
Fecha de conversión21.06.2020
Tamaño2.78 Mb.
1   ...   46   47   48   49   50   51   52   53   ...   65
4.1 General Operation

Conventional operating procedures apply when using the Welding Power Source, i.e. connect work lead directly to work piece and electrode lead is used to hold the electrode. The welding current range values should be used as a guide only. Current delivered to the arc is dependent on the welding arc voltage, and as welding arc voltage varies between different classes of electrode, welding current at any one setting would vary according to the type of electrode in use. The operator should use the welding current range values as a guide then fine tune the welding current to suit the specific application. Refer to the electrode manufacture's literature for further information.

Compartir con tus amigos:
1   ...   46   47   48   49   50   51   52   53   ...   65

La base de datos está protegida por derechos de autor © 2019
enviar mensaje

    Página principal